Views: 291 Author: Site Editor Publish Time: 2022-02-28 Origin: Site
With the rapid development of medicine, food and other industries, powder packaging machines have just caught up with this wave of limelight. For ultra-fine powders that are prone to dust and high-precision packaging requirements, powder automatic weighing packing machines are the best choice. Powder packaging machine is based on the signal given by the weight sensor to complete the two-speed filling, metering and lifting work, suitable for medicine, food, chemical and other industries. The powder weight packing machine is simply prepared for the automatic quantitative filling of powdery materials with average or poor fluidity, such as powdered objects such as powdered medicine, pollen, milk powder, flour, soybean powder, and camellia noodles.
I believe you also know that no matter what type of weighing and sealing machine, maintenance is essential. Because only in this way, the powder filling machine can reduce failures, and can also extend the service life of the equipment. The following are some suggestions for maintaining the small powder packing machine that we have organized:
First, you need to regularly lubricate the gear meshes, the oil holes of the seated bearing and the moving parts. Once every shift, because the powder packaging machine does not have lubricating oil, it will cause friction and damage. machine. Please also be careful not to put the oil tank on the rotating belt, otherwise it will cause slipping and loss of rotation or premature aging of the belt, which will damage the meshing parts of the gears, the oil hole of the seated bearing and all moving parts. After every 300 hours of operation for the first time, clean the interior and replace it with new oil, and then change the oil every 2500 hours of operation thereafter. If it is replaced from time to time, the reducer will run out of oil, the packaging machine will crash, and it will not continue to run.
Second, the powder weight and sealing machine needs to be cleaned frequently. After stopping, you must clean the metering part in time, and you also need to clean the heat sealer body frequently, especially for the packed materials with high sugar content in granules, and clean the turntable. And the dust in the unloading door, heat-sealing device body, electric control box, and keeping the two heat-sealing device bodies in an open position.
Third, you need to regularly maintain the powder weighing and bagging machine and check the screws of each part of the powder packaging machine. Otherwise, it will affect the life of the powder packaging equipment and the normal long-distance rotation of the whole machine. You also need to pay attention to waterproof, moisture-proof, anti-corrosion, and rat-proof according to the instructions to ensure that the electric control box and the wiring terminals are clean and Cause electrical failure.
The powder weigh filler packaging machine is indispensable in the production and operation of the enterprise. Once the machine has a problem and cannot work, it will eventually affect the entire production schedule and affect the company's development. Therefore, the maintenance of a machine is very important.